neos smartcam

reqs

• guide
• repo
  • hacks/cfw/wyzecam_v2/cfw-1.1.bin
• 16gb sd card

process

1. delete any partitions on the sd card and create a single 512MB partition (labelled 0b)
2. install dosfstools (on arch)
3. create fat32 filesystem

   sudo mkfs.fat -F 32 /dev/sdb1

4. mount filesystem
5. copy "cfw-1.1.bin" file to filesystem and rename to "demo.bin"

   sudo cp cfw-1.1.bin /mnt/demo.bin

6. insert sd card into camera
7. while holding down setup button plug in usb
8. continue holding button for 10-20 seconds after the blue light
9. let go and wait for amber light to stay steady (up to 3 minutes)
10. put sdcard back into pc. remove demo.bin and copy over all of "firmware_mod"
11. update config/wpa_supplicant.conf